MFA Comodrills
HOME
>> HOME >> GEARBOXES
OUR PRODUCTS
Batteries
Battery Chargers
Gearboxes
Gearbox Accessories
Low Voltage Lighting
Miniature DC Motors
Miniature Power Drill
Solar Panels
Speed Regulators
Steel & Brass Studding
Thunderbolt Lamp
Timing Belts & Pulleys
 

970DLN SERIES NOISE ATTENUATED 35mm SPUR GEARED MOTOR. (CENTRAL OUTPUT SHAFT)



Designed for heavier-duty industrial and model applications. These units boast a high quality, five pole low rpm motor providing approx 33% more motor torque than the standard RE540/1 motor, with a considerable reduction in motor noise level. The metal gearbox incorporates sleeve bearings, enabling the high torque transfer from the motor to be transmitted through the gearbox.

Click here to download a complete specification sheet in Adobe pdf format

RATIOS NOW AVAILABLE AS EX-STOCK ITEMS.

970D61LN (4.5v - 15v) WITH RE 540/1LN MOTOR. RATIO 6:1

970D161LN (4.5v - 15v) WITH RE 540/LN1 MOTOR. RATIO 16:1

970D471LN (4.5v - 15v) WITH RE 540/1LN MOTOR. RATIO 47:1

970D1561LN (4.5v - 15v) WITH RE 540/1LN MOTOR. RATIO 156:1

970D7501LN (4.5v - 15v) WITH RE 540/1LN MOTOR. RATIO 750:1

970D28121LN (4.5v - 15v) WITH RE 540/1LN MOTOR. RATIO 2812:1

Subject to minimum order quantities of 250 units, the following ratios are also available with a six week lead-time. The physical dimensions of these other gearboxes may vary from the data as illustrated above. Details of individual gearboxes are available upon request.

Gearbox 19:1 with 540/1 motor
Gearbox 21:1 with 540/1 motor
Gearbox 31:1 with 540/1 motor
Gearbox 38:1 with 540/1 motor
Gearbox 56:1 with 540/1 motor
Gearbox 63:1 with 540/1 motor
Gearbox 69:1 with 540/1 motor
Gearbox 75:1 with 540/1 motor
Gearbox 94:1 with 540/1 motor
Gearbox 104:1 with 540/1 motor
Gearbox 113:1 with 540/1 motor
Gearbox 125:1 with 540/1 motor
Gearbox 169:1 with 540/1 motor
Gearbox 188:1 with 540/1 motor
Gearbox 219:1 with 540/1 motor
Gearbox 234:1 with 540/1 motor
Gearbox 250:1 with 540/1 motor
Gearbox 281:1 with 540/1 motor
Gearbox 312:1 with 540/1 motor
Gearbox 375:1 with 540/1 motor
Gearbox 422:1 with 540/1 motor
Gearbox 438:1 with 540/1 motor
Gearbox 469:1 with 540/1 motor
Gearbox 563:1 with 540/1 motor
Gearbox 625:1 with 540/1 motor
Gearbox 938:1 with 540/1 motor
Gearbox 1250:1 with 540/1 motor
Gearbox 1875:1 with 540/1 motor
Gearbox 3750:1 with 540/1 motor
Gearbox 5625:1 with 540/1 motor

IMPORTANT NOTICES

At very low ratios the torque produced by this geared motor combination may exceed the maximum permissible torque of
the gearbox. In this situation the unit must not be allowed to stall as this may damage the gears. Please refer to the table of the
gearbox ratings to ascertain the appropriate geared motor combination.

Due to the wide range of applications for this product it is the users responsibility
to establish the products suitability for their individual purpose(s).

© Copyright MFA/COMO DRILLS