MFA Comodrills
HOME
>> HOME >> SPEED REGULATORS
OUR PRODUCTS
Batteries
Battery Chargers
Gearboxes
Gearbox Accessories
Low Voltage Lighting
Miniature DC Motors
Miniature Power Drill
Solar Panels
Speed Regulators
Steel & Brass Studding
Thunderbolt Lamp
Timing Belts & Pulleys
 

Speed Regulators


PART NO. 919D2

* ALLOWS INFINITELY VARIABLE R.P.M. TO BE SET ON MFA/COMO DRILLS 919D SERIES GEARBOXES AND MOTORS.

* OPERATES FROM INPUTS OF 6 - 15 VOLT

* OUTPUT 0 - INPUT VOLTAGE

* PULSE WIDTH MODULATION PROVIDES PROPORTIONAL OUTPUT CONTROL.

* SMALL - COMPACT - ROBUST CONSTRUCTION FOR VERSATILITY AND RELIABLE SERVICE.

SPECIFICATION:-

Min Input 6 volts
Max Input 15volts
Min Output 0 volts
Dims. 34 x 27 x 18 mm
Max Output 15 volts
Weight 30 gms approx.
Loading 3 amps continuous
5 amps peak only.
Insulated spade connectors fitted on input cables
Input & output cables 21cm

Supply and output cables are trimmed to 21 cm to meet current EMC regulations.

Edge to edge frequency, min 1136 Hz, max 1250 Hz, average 1200 Hz. Mark to space varies motor speed.

 

Panel Mounted Variable Speed Voltage Regulator - Part No. 919D2P

* Panel Mounted with external control knob.

* Allows infinitely variable R.P.M. to be set on MFA/Como Drills. 919D, 927D, 918D (12v), 940D, 941D & 950D series gearboxes and motors.

* Operates from inputs of 6-15 volt.

* Output 0 - input voltage.

* Pulse width modulated provides torque maintenance and proportional output control.

* Small - compact - robust construction for versatility and reliable service.

SPECIFICATION:-

Min Input 6 volts
Max Input 15 volts
Dims 62mm x 41mm x 4mm (incl knob)
Weight 32 gms approx
Min Output 0 volts
Max Output 3 amps
Loading 3 amps continuous
5 amps peak only

Supply and output cables must be trimmed to 21cm to meet current EMC regulations.

Edge to edge frequency, min 1136 Hz, max 1250 Hz, average 1200 Hz. Mark to space varies motor speed.

 

PANEL MOUNTED BI-DIRECTIONAL VARIABLE SPEED REGULATOR - Part No. 919D2PR

* Forward & Reverse PWM Speed Regulator.

* Easy installation - Unit panel mounted through 9.5mm hole. (Electrical connection via screw terminals).

* 6 - 15v operation d.c. (from smooth non digital d.c. input).

* Output 0 - 100% of input voltage.

* Compact construction - board size 66 x 58mm

These are regulators with variable outputs designed to be used with miniature and sub miniature
motors. Allows the motor to be powered from a d.c. source either battery or transformer recitifier
(transformer rectifier must have a non digital output).

Unit employs PWM circuitry which varies the output pulse width to vary the motor speed while
maintaining a constant output voltage. PWM also assists in maintaining motor torque. Output
may not zero motor speed in NO load conditions.

SPECIFICATION:-

Edge to edge frequency 2KHz
Linear output response
Input 6 - 15 volts d.c. (non digital)
Full ‘H’ bridge output drive
Rating 3 Amps continuous, 5 Amps peak.
Circuit provides approx 1/5th second breaking pause between directional changes.

 

PANEL MOUNTED BI-DIRECTIONAL (12A) VARIABLE SPEED REGULATOR - PART NO. 919D3PR

The 919D3PR uses pulse width modulation (PWM) to allow smooth, efficient bi-directional control of DC motors and other devices.

The output is fully adjustable from 0 to 12 volts DC* and can supply currents of up to 12Amps continuously.

Features.

* Smooth bipolar (+ or - ) output control up to 12A DC continuous.

* Incorporates overcurrent and accidental supply-reversal protection. Additional thermal protection option available.

* Soft start feature reduces the in-rush current when first energised from the DC supply.

* Simple screw-in terminal blocks for supply and motor connections.

* Easy installation by panel mounting or screw fixing. Control knob & insulating washers included.

© Copyright MFA/COMO DRILLS